IMM Hydrogen Samplers
DESCRIPTION
SYSCON Sensors Hydrogen Measuring probes are designed for the Steel industry to aid in the degassing process and to ensure that final hydrogen content remains within specified limits. Control of hydrogen level in finished steel products is essential to reduce and eliminate flaking, fissures, cracking, blowholes, pinholes, breakouts and other defects. SYSCON Hydrogen Measuring probes include non-splash coatings which are specific for use at Ladle or Tundish stations.
Immersion tubes are made from high density convolute wound paper for maximum strength and resilience. Probes with immersion tubes are available in a variety of lengths. Maintain stock in cool, dry, and well-ventilated location. Paper tube moisture content must remain below 12%. Appropriate PPE required; splashing of molten metal can occur.
FEATURES
- Reliable determination of Hydrogen content in steel
- Designed for use at LMF, VOD/VD, and Tundish
- Compatible with industry standard lances, cables, and analysis equipment
- Easily detects hydrogen, even at low levels, by means of thermal conductivity detection
- Essential for quality control of dissolved hydrogen
- Suited for automatic handling equipment
- Economically priced
- Manufactured under ISO 9001:2015 Quality Standards
SPECIFICATIONS
|
Sampling Methods |
Nitrogen gas injection; Hydrogen diffusion and re-collection |
|
Analysis Principle |
Conductivity of dissolved Hydrogen Accuracy: +-0.1 ppm Range: 0.5 - 14 ppm |
|
Slag Cap |
Steel and cardboard |
|
Non-Splash Sleeve |
Silica sand (LMF, VOD/VD) |
|
Sampling Time (Max) |
120 seconds |
|
Sampling Time (Max) |
3,100 F |
|
Tube Length |
As required |
|
Tube Diameter |
ID: 1.15" (29.3mm), OD: 1.85" (47 mm) |
ORDERING INFORMATION
|
Sampling method |
Nitrogen gas injection; Hydrogen diffusion and re-collection |
|
Analysis principle |
Conductivity of dissolved Hydrogen Accuracy: +-0.1 ppm Range: 0.5 - 14 ppm |
|
Slag Cap |
Steel and cardboard |
|
Non-splash sleeve |
Silica sand (LMF, VOD/VD) Sintectic heat resistant fiber (Tundish) |
|
Sampling Time (Max) |
120 seconds |
|
Sampling Temp (Max) |
3,100 F |
| Tube Length |
As required |
| Tube Diameter |
ID: 1.15” (29.3mm), OD: 1.85” (47mm) |
DOCUMENTATION
Hydrogen Samplers Data Sheet